Industry News_Electromechanical spare parts

Changzhou Minrui Precision Die Casting Co., Ltd.

中文

Blog

Media

Industry News

Company news

Home page

04-20

→

Aluminum alloy die casting industry prospects

Aluminum ADC12 for aluminum alloy die-casting. Aluminum alloy die-casting products are mainly used in electronics, automobiles, motors, home appliances and some communication industries. Some high-quality aluminum alloy products with high performance, cover accuracy and high toughness are also used in large aircraft and ships. and other demanding industries. Die casting is a kind of precision scoring casting method. The dimensional tolerances of die castings cast by die casting are very small and the surface accuracy is very high. In most cases, die castings can be assembled and applied without turning. Threaded parts Can also be cast directly. Compared to other casting techniques for copper, die casting has a flatter surface and higher dimensional consistency.

04-20

→

How to solve the cracking on the surface of aluminum alloy die castings?

1. The iron content or silicon content in the aluminum alloy is too high. 2. The content of harmful impurities in the alloy is too high, which reduces the plasticity of the alloy. 3. Aluminum alloy die-casting mold, especially the overall temperature of the mold cavity is too low. 4. Where there are drastic changes in the wall thickness and thickness of the casting, the shrinkage is blocked, and the sharp corners form stress. 5. The mold retention time is too long and the stress is large. the solution: 1. Correctly control the alloy composition. 2. Change the casting structure, increase the angle, change the draft angle, and reduce the wall thickness difference. 3. Change or increase the ejection position, so that the ejection force is uniform.

04-20

→

Fitting relationship between die casting mold and die casting

Die-casting molds are generally selected according to the required tonnage. The larger the mold, the larger the required die-casting machine. After selecting a suitable die-casting machine, the die-casting mold is designed according to the die-casting machine to determine the feed of the mold. The position of the mouth and the mounting hole and the fixing method of the mold, so not only must know the die casting machine but also the projection area of the product. If the product is too small, consider whether one mold has multiple holes. To accommodate the mold, it is also necessary to consider whether the product is too thin or too thick. For some products with very thin design, a large-tonnage die-casting machine should be considered, and the performance of the die-casting machine used should be clearly understood.

04-20

→

Reasons and Solutions for Deformation of Aluminum Alloy Die Castings

First analyze why aluminum alloy die castings are deformed? One is the overall or local deformation, and the other is that the geometry of the die casting does not match the drawings. The reasons for this situation are as follows. The structure of the casting is not good and the mold is opened early, which leads to insufficient rigidity of the casting and improper setting of the ejector pin, resulting in uneven force during ejection, improper gate position or too thick gate. It is easy to deform when the gate is removed, the local rough surface of the mold causes a large resistance, the deformation of the product when the product is ejected, and the temperature of the mold is too high, resulting in no solid state of the casting, or excessive force during the ejection, resulting in deformation of the product. For this kind of deformation problem of aluminum alloy die castings, the solution can be considered from the following points, improving the casting structure, reasonably adjusting the mold opening date and pressure holding, reasonably setting the ejection position and the number of ejectors, changing the gate thickness, strengthening the mold Handling, reducing demolding resistance, controlling local mold temperature, and maintaining mold thermal balance.

04-20

→

Reasons why aluminum alloy die castings cannot be anodized

Aluminum alloy die castings generally contain high silicon content, and the anodic oxide film is dark, and a colorless and transparent oxide film cannot be obtained. Dark grey, so cast aluminium alloys are not suitable for anodising.

04-20

→

What are the technical requirements of aluminum alloy die casting process?

The technical requirements of aluminum alloy die-casting mainly include mechanical properties, die-casting size and surface quality. 1. Mechanical properties: When the die-casting sample is used for inspection, the mechanical properties should meet the requirements of GB/T15115. When the die-casting body test is used, the designated part The mechanical properties of the cut samples should not be lower than 75% of the single cast samples.

04-20

→

What are the advantages of zinc alloy die castings

1. Relatively large. 2. Good casting performance, it can die-cast precision parts with complex shapes and thin walls, and the surface of the castings is smooth. 3. Surface treatment: electroplating, spraying, polishing, grinding, etc. 4. It does not absorb iron, corrode and die during melting and die casting. 5. It has good mechanical properties and wear resistance at room temperature. 6. Low melting point, melting at 385 degrees Celsius, easy to die-cast.

04-20

→

Main uses of aluminum die castings

Aluminum alloy die-casting products are mainly used for signal lamp shells, handles, fishing reel accessories, outdoor locks, electrical products, communication equipment, kitchen accessories, motorcycle radiators and horn covers, LED lamp shells, camera equipment, heat sinks, auto parts, electronics Some high-performance, high-precision, high-toughness high-quality aluminum alloy products are also used in industries with high requirements such as large aircraft and ships.

< 1 2 >

Changzhou Minrui Precision Die Casting Co., Ltd.

Contact phone number

13615297758Manager Kuang

Fax: 0519-83531903

Postal code: 213139

Address: No. 18 Junmin Road, Menghe Town, Xinbei District, Changzhou City

Email:cz.minrui@163.com

Main product lines:

Electromechanical spare parts

Home appliance spare parts

car lamp radiator

automobile parts

Indoor Lighting Parts

Communication spare parts

IGBT module heat sink

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Official Mobile Site

Business WeChat